November 20, 2010
Next up was building the sides for the cabinet. I traced one side piece on a piece of MDF and then used a circular saw to cut it out (using a jigsaw for that inner section). I’ll need four of these total, fusing two-each together to make a 1.5” side panel. The hole in the center is to slide in a 32” LCD TV or monitor in the future. For now, I’m going to install a 27” LED ASUS monitor that’s great for gaming.

Next up was building the sides for the cabinet. I traced one side piece on a piece of MDF and then used a circular saw to cut it out (using a jigsaw for that inner section).

I’ll need four of these total, fusing two-each together to make a 1.5” side panel. The hole in the center is to slide in a 32” LCD TV or monitor in the future. For now, I’m going to install a 27” LED ASUS monitor that’s great for gaming.

3:25pm  |   URL: http://petemadethis.com/post/1629053343/next-up-was-building-the-sides-for-the-cabinet-i
(Notes: 1)
  
Filed under: arcade cabinet projects 
  1. petemadethis posted this